A QR code can tell us where a component came from. It cannot, by itself, tell us whether that component is safe to install again.
Circular construction needs better evidence, not just better labels
Construction and demolition waste accounts for more than one third of all waste generated in the European Union, according to the European Commission. Recovery practices vary substantially between member states, and reported recovery does not necessarily mean high-value reuse. The Commission also warns that hazardous substances, including asbestos and solvents, can complicate recovery when materials are not separated appropriately [1].
The industry’s circular ambition is therefore not simply to move more tonnes out of landfill. It is to retain useful products and components in applications where their condition, performance and legal status can be established.
A steel beam, facade panel or raised-floor unit may appear suitable for a second life. Yet the future project needs answers: What exactly is it? What loads or exposure has it experienced? Has it been altered? Which tests and approvals are relevant? Who accepts responsibility for its new use?
A digital record can connect these questions. It cannot answer all of them automatically.
What the new EU construction-products rules actually change
Regulation (EU) 2024/3110 modernises the European framework for marketing construction products. The Council formally adopted the legislation on 5 November 2024, highlighting digital product passports, environmental information and circularity as important elements [2]. The legal text establishes a framework for a construction digital product passport system, including identification, access, integrity, security and relevant product information [3].
EU and Norwegian applicability must be distinguished: an EU regulation should not be assumed to apply identically in Norway without checking EEA incorporation and national implementation for the relevant product and date. Implementation is staged. The European Commission must specify the passport system through delegated measures; it would be inaccurate to assume that every product on a construction site already carries a legally required, fully operational EU passport. Belgium’s federal economic administration explains that the detailed arrangements are still being developed and that manufacturer obligations follow the relevant delegated act and transition period [4].
Equally important, a manufacturer’s digital product passport and a building owner’s material inventory are not necessarily the same record. A product-level passport can describe an identified product type and its declarations. A project-level second-life record must also capture installation history, actual condition, dismantling, testing, storage, and acceptance for a specific future use.
A passport is an index to evidence, not a substitute for it
A useful record should distinguish four kinds of information.
Identity: manufacturer, product family, model, serial or batch number where available, dimensions, and durable identifier.
Declared performance: applicable declaration of performance and conformity, specifications, intended use, and limitations, tied to the correct regulatory and standards context.
Life history: building and installation location, exposure conditions, repairs, modifications, inspection history and removal method. Historical information may be incomplete; uncertainty should remain visible rather than being filled by assumption.
Second-life suitability: condition survey, sampling and testing, assessment against the proposed new duty, relevant legal classification and approvals, and the professional decision authorising reuse.
The last category is fundamentally project-specific. A valid historical declaration does not automatically prove that a recovered component retains the same performance after decades of service or after dismantling.
The proposed second-life evidence chain
Jarlhalla proposes a six-gate editorial framework for a small, auditable reuse pilot. These are recommended process controls, not mandatory stages specified by Regulation (EU) 2024/3110.
Gate 1 — Identify and quarantine. Assign a unique salvage identifier, photograph the component, record its location and prevent uncontrolled mixing with unassessed stock. Screen for obvious hazards and establish a safe handling plan before intrusive work.
Gate 2 — Recover the original evidence. Collect manufacturer records, declarations, drawings, maintenance logs, installation dates and any available digital product passport. Record which sources are primary documents and which are unverified recollections.
Gate 3 — Inspect and classify uncertainty. Document corrosion, cracking, deformation, moisture, coatings, connections, contamination and missing provenance as relevant to the material. Mark each claim as verified, inferred, unknown or not applicable.
Gate 4 — Test for the proposed duty. Determine, through competent professionals, whether testing, calculations, certification or other conformity evidence is necessary. Requirements depend on material, jurisdiction and intended application. A component suitable for a non-structural use may not be acceptable for a load-bearing one.
Gate 5 — Approve a defined destination. Link the technical assessment to the new project’s design conditions, applicable building regulations and responsible decision-maker. A decision for one use should not silently transfer to a different use.
Gate 6 — Preserve the audit trail. Store the component identifier, evidence versions, test results, decisions, restrictions, installation location and future inspection requirements in a controlled information environment. Ensure future custodians can distinguish original product declarations from later assessments.
Why mass-based recovery statistics can mislead
Ireland’s Environmental Protection Agency reported approximately 7.9 million tonnes of construction and demolition waste in 2024, of which 77% was soil and stones. It reported that 81% of non-hazardous construction and demolition waste excluding soil and stones was recycled or backfilled, and that backfilling was the dominant treatment for soil and stones [5].
These figures are useful for understanding material flows, but they do not show how many individual components were directly reused at equal or higher functional value. A project claiming circular success should distinguish direct reuse, preparation for reuse, recycling, other recovery, backfilling and disposal.
That distinction also matters for environmental claims. Reusing an existing component may avoid some manufacturing impacts, but transport, cleaning, testing, refurbishment, service-life assumptions and replacement scenarios can change the result. Comparative life-cycle calculations need a declared functional basis and transparent boundaries; a passport alone does not establish carbon savings.
An illustrative component record
Consider a hypothetical recovered facade bracket. Its record could contain:
| Evidence field | Illustrative entry |
|---|---|
| Salvage ID | JHL-PILOT-BR-001 |
| Original product identity | Manufacturer unknown; profile and dimensions measured |
| Source | Building A, facade grid C4 |
| Condition | Visual inspection complete; coating composition unknown |
| Evidence gap | No original declaration or batch trace |
| Proposed new use | Non-structural demonstration assembly |
| Required decision | Material identification and suitability review by competent professional |
| Release status | Hold — not approved for installation |
This is an invented teaching example, not a tested Jarlhalla component. Its value lies in showing why a visible ‘hold’ state is more trustworthy than a polished but incomplete digital profile.
A 30-day pilot for an actual project
Week 1 — Select a narrow material stream. Choose a limited batch of components from a controlled source, identify owners and safety responsibilities, and define what counts as a successful evidence record.
Week 2 — Build the traceability baseline. Assign IDs, collect records, map provenance and document missing information. Do not assume that a barcode or QR code validates the underlying evidence.
Week 3 — Test the assurance process. Ask competent reviewers to evaluate selected components for one intended application. Log every rejection, request for more evidence, and change in permitted use.
Week 4 — Review cost and outcomes. Measure documentation completeness, number of components assessed, acceptance and rejection rates, labour hours, testing costs and confirmed destinations. Estimate environmental effects only with appropriate comparative assumptions.
A successful pilot might conclude that certain components should not be reused. That is still a valuable result if it prevents unsafe decisions and clarifies what evidence is missing.
Design for privacy, interoperability and continuity
The EU regulatory framework emphasises interoperable formats, controlled access, integrity and protection of commercially sensitive information [3]. A project record should follow similar principles. It should not expose occupants’ personal data or security-sensitive building details merely because a QR code is convenient.
Prefer portable identifiers and structured exports over a proprietary database that disappears when a vendor contract ends. Keep original source documents, record hashes or version identifiers where useful, and separate factual observations from assessments and approvals.
The next step is evidence-aware circularity
A digital passport is a promising way to make product information more accessible. The more demanding task is to preserve the evidence required for decisions after a product has been installed, used, removed and offered for a new purpose.
For architects and engineers, that means linking circular design to inspection, performance, regulation and professional accountability. For contractors, it means planning selective dismantling and traceability before materials become anonymous waste. For owners, it means treating reliable records as part of long-term asset value.
The practical principle is simple: identify the product, preserve its history, verify its condition, assess its new duty, and record who authorised the decision. A passport can help connect the chain. It cannot replace it.
Related Jarlhalla reading: Reclaimed Structural Steel and Whole-Life Carbon in Buildings.
Sources and verification notes
- European Commission, Construction and demolition waste, accessed 11 November 2026. Scope, waste share, recovery variation and hazardous material caveats.
- Council of the European Union, Building materials: Council adopts law for clean and smart construction products, 5 November 2024.
- European Union, Regulation (EU) 2024/3110, adopted 27 November 2024. Construction-product passport provisions and safeguards.
- Belgian FPS Economy, The Digital Product Passport for construction products, accessed 11 November 2026. Explanation of staged implementation.
- Ireland Environmental Protection Agency, Construction and demolition waste statistics: 2024, published June 2026. National waste flows and treatment categories.
Source limitations: The EU legislation establishes a framework, not a claim of universal present-day passport implementation. Irish waste statistics are not representative of every European country. The proposed six-gate workflow and pilot are editorial recommendations, not statutory requirements or documented Jarlhalla outcomes.
Featured image: AI-generated conceptual editorial illustration; not a real project, certification or construction detail for execution.

